Suomy helmet Apex matt black + black visor + gold mirror + transparent

To have adequate protection, the helmet must fit perfectly and be correctly and securely fastened.

so that it can not be removed by pulling or rotating it on the head.

If it is too big, it can go down to cover the eyes or turn sideways while driving, thus preventing proper visibility.

Calotta CAP in three sizes (M, L and XL) printed by hand.

The new composite material used is a mixture of carbon in various weights and aramid fabric.

INSIDE POLYSTYRENE in three sizes (M, L and XL).

The particular conformation and the differentiated density construction increase the mechanical resistance in case of accidental impact.

VISOR printed and obtained from a flat slab and then thermoformed.

Each visor is a unique piece with optical properties and mechanical resistance, without equal. Plus thanks to this process

it is not necessary the application inside the visor, of overlapping lenses as already provided with permanent "anti-fog" and "anti-scratch" treatment.

D-RING RETENTION SYSTEM D-RING RITENTATION SYSTEM designed and patented by Suomy:

the now reliable and tested double D ring system ensures stability, safety and robustness.

How it works: insert the free edge of the strap into the rings. Pull the terminal until the strap presses firmly against the jaw.

Once this operation has been carried out, it must no longer be possible to remove the helmet; check that by grasping it at the back and rotating it forward,

the helmet can not be removed and remains firmly on the head.

If the helmet tends to slip off or rotate freely on the head, tighten the strap again until the pressure is right and repeat the test.

If after retesting, you can not effectively tighten the retention system, refrain from using the helmet.

Only after checking the correct tension of the strap, secure the free end by locking it with the automatic button on the release tab.

The automatic button only serves to fix the free end of the strap to prevent it from waving while driving.

The fixing of the release button does not guarantee that the helmet has been worn and fastened correctly:

the correct tightening of the strap must be verified exclusively by means of the operations described in the previous paragraphs.

To release the retention system, release the automatic button and pull the release tab to loosen the clamp.

Remove the free edge of the strap from the "D-Rings" rings. Use the release tab only to remove the helmet!

Never operate the release tab while driving.

If the release system does not work properly, refrain from using the helmet and contact only authorized Suomy personnel.

Anti-theft ring on the strap

sold with original transparent visor, gold and black aftermarket